Fixing Common Thermostat Problems

Most homeowners have little HVAC knowledge beyond using the thermostat. If your thermostat fails, many people end up calling a Denver HVAC company thinking there is something wrong with their air conditioning equipment when in reality, there is something wrong with the thermostat. When the AC refuses to turn on, it can be hard for someone who is not an HVAC expert to determine if the problem is in the equipment or in the thermostat.

However, before you call a Denver HVAC company, try and follow this troubleshooting guide to see if you can get to the root of the problem. Even more advanced digital and zone-control thermostats really just function as thermometers that switch the HVAC system on and off depending on the temperature. As an electronic switch, the thermostat needs to be hooked up to power in order for it to work and communicate with the heating and air conditioning equipment.

Usually the power for the thermostat comes from the air conditioning unit itself. So any break along this line could cause the thermostat to turn off. You can check the circuit breaker in the air handler or heating split system to see if it has flipped off. Sometimes the handling unit also has a power switch outside the unit that looks like a light switch. Some digital thermostats have two different power sources: battery and wired from the external unit. The batteries power the display, so if the batteries go out, the display stops working but the ac unit does not stop cooling. You can save yourself a lot on calling a Denver air conditioning repair company by simply replacing the batteries. The batteries are there to maintain your programmed thermostat settings in case the power goes out.

If the problem with the thermostat is not the power, it could be the location the thermostat is installed. Except in very advanced models with multiple temperature sensors over the building, most thermostats have the thermometer built in. That means if the thermostat was built into an area that does not represent the air temperature in your home then it will give false readings.

Thermostats with mercury bulbs need to be level to give accurate temperature readings. Heating anticipatory can also get out of whack when not properly calibrated. The anticipatory needs an amp meter in mechanical thermostats to adjust to make sure it properly keeps the blower running past the burner time to get excess hot air out of the ducts.